<ins id="rzffp"></ins>
<ins id="rzffp"></ins>
<cite id="rzffp"><noframes id="rzffp">
<del id="rzffp"></del>
<ins id="rzffp"></ins>
<i id="rzffp"></i>
<del id="rzffp"><th id="rzffp"></th></del>
<cite id="rzffp"><span id="rzffp"><var id="rzffp"></var></span></cite>
<ins id="rzffp"><noframes id="rzffp"><ins id="rzffp"></ins>
<ins id="rzffp"></ins>

產品服務熱線:0086-416-8301559   8302059
郵箱:563117193@qq.com
Copyright? 2017 錦州萬得焊材有限公司 all rights reserved.   
遼ICP備05025417號  技術支持中企動力

Carbon Steel

Low Alloy Steel

High Strength Steel

Stainless Steel

Hard Surfacing

Submerged Arc Welding Wire

Electrode

Stainless Steel Strip

WD-SJ101埋弧焊用燒結焊劑WD-SJ101 SAW FLUX

符合標準:GB/T5293-1999 F4A4-H08A AWSA5.17-2004F6A4-EL8 F5A4-H10Mn2 F7A4-EH14GB/T12470-2003 F55A2-H08MnMoA AWSA5.23-2004 F8A0-EA2-A1?認證機構:ABS,CCS,DNV,GL,LR
沒有此類產品
產品描述

符合標準:

GB/T 5293-1999 F4A4-H08A AWS A5.17-2004 F6A4-EL8 F5A4-H10Mn2 F7A4-EH14

GB/T 12470-2003 F55A2-H08MnMoA AWS A5.23-2004 F8A0-EA2-A1

 

認證機構:ABS, CCS, DNV, GL, LR

 

說明:WD-SJ101是氟堿型堿性燒結焊劑,堿度約1.8(BIIW),為球形顆粒,粒度為10-60目。焊劑的熔敷金屬純凈,具有較高的低溫沖擊韌性,焊縫成形美觀,脫渣容易??捎糜趩谓z、雙絲、多絲和窄間隙埋弧自動焊??山恢绷鲀捎?,直流時焊絲接正極。

 

用途:可用于船舶、壓力容器、貯罐、鋼結構、橋梁、螺旋焊管等結構的對接及角接焊縫。

 

焊劑參考成分(%):

 

 

熔敷金屬力學性能:

 

 

注意事項:

1、焊劑如果受潮,在使用前須經300~350℃烘焙2小時。

2、焊接處須清除鐵銹、油污、水分等雜質。

 

WD-SJ101 Agglomerated Flux For S.A. Welding
 
Standards:EN760 A FB 1 67 AC H5
 
GB/T 5293-1999   F4A4-H08A AWS A5.17-2004   F6A4-EL8
F5A4-H10Mn2 F7A4-EH14
 
GB/T 12470-2003   F55A2-H08MnMoA AWS A5.23-2004   F8A0-EA2-A1
 
Approvals: ABS, CCS, DNV, GL, LR
 
 
Introduction
 
WD-SJ101 is an agglomerated fluoride-basic type flux with a basicity index of BIIW 1.8. The flux is spherical granular, grain size is from 10 to 60 mesh. As weld metal is very purity, the diffusible hydrogen content in deposited metal is less than 5ml/100g, so has very good toughness at the low temperature, therefore, crack resistance is extremely high. WD-SJ101 assures excellent weldability, bead appearance is beautiful, slag is extremely easy to remove. WD-SJ101 is suitable for submerged-arc twin-wire, tandem and multi-wire welding as well as for welding with the two-run technique. The special production method ensures that the flux  has low moisture pick-up and granular stability. Flux shall be capable of meeting the applied requirements. As the bulk density is low, so is the consumption rate. 
 
Applications
 
Flat butt and fillet welding of mild and high tensile strength steels for frames, bridges, pipes, pressure vessels, rolling stock, offshore structures and ships.
 
Characteristics
 
It has excellent welding technology properties for fillet welding of thick plates. Regularly shaped welds are deposited without reduction of area or interface notches. Blowholes scarcely
occur. Satisfactory weldability and mechanical properties are obtained with heat input.
 
Main Constituents (%)
 
 
Typical mechanical property of deposited metal
 
 
Typical chemical composition of deposited metal (%)
 
 
Notice:
 
1. Flux should be redried at 300~350°C for 2 hours.

 

2. All dust, oil and rust should be removed. 
未找到相應參數組,請于后臺屬性模板中添加
暫未實現,敬請期待
暫未實現,敬請期待
久久综合九色综合色鬼狠狠色,国产无遮挡又黄又爽不要VIP,天天拍夜夜添久久精品,久久伊人精品青青草原,亚洲中文字幕无码中文字