<ins id="rzffp"></ins>
<ins id="rzffp"></ins>
<cite id="rzffp"><noframes id="rzffp">
<del id="rzffp"></del>
<ins id="rzffp"></ins>
<i id="rzffp"></i>
<del id="rzffp"><th id="rzffp"></th></del>
<cite id="rzffp"><span id="rzffp"><var id="rzffp"></var></span></cite>
<ins id="rzffp"><noframes id="rzffp"><ins id="rzffp"></ins>
<ins id="rzffp"></ins>

產品服務熱線:0086-416-8301559   8302059
郵箱:563117193@qq.com
Copyright? 2017 錦州萬得焊材有限公司 all rights reserved.   
遼ICP備05025417號  技術支持中企動力

Carbon Steel

Low Alloy Steel

High Strength Steel

Stainless Steel

Hard Surfacing

Submerged Arc Welding Wire

Electrode

Stainless Steel Strip

WD-8600埋弧焊用燒結焊劑WD-8600 SAW FLUX

符合標準:?GB/T5293-1999 F4A2-H08MnA AWSA5.17-2004 F6A2-EM12K???GB/T12470-2003 F48A4-H10Mn2 AWSA5.17-2004 F7A4-EH14
沒有此類產品
產品描述

符合標準: 

GB/T 5293-1999 F4A2-H08MnA AWS A5.17-2004 F6A2-EM12K      

GB/T 12470-2003 F48A4-H10Mn2 AWS A5.17-2004 F7A4-EH14

 

說明:WD-8600是鋁堿型中性偏堿燒結焊劑,堿度為1.1-1.3(BIIW),為灰褐色或深灰色球形顆粒,直流焊接時焊絲接正極,最大焊接電流可達1000A,粒度為10-60目。電弧穩定,成形美觀,具有 優良的脫渣性能,焊縫金屬純凈,具有較高的沖擊韌性??刮毙阅?好,顆粒強度高,松裝密度小,焊接過程中焊劑消耗量少。配合適當的 焊絲可焊接多種低合金鋼結構,焊接鍋爐模式水冷壁時,焊速可達 70m/h以上,特別適合焊接薄板高速和厚板窄坡口、窄間隙等結構。

 

用途:可用于鍋爐水冷壁、工字梁、箱型梁等鋼結構。

 

焊劑參考成分(%):

 

 

熔敷金屬力學性能:

 

 

注意事項:

1、焊劑如果受潮,在使用前須經300~350℃烘焙2小時。 2、焊接處須清除鐵銹、油污、水分等雜質。

 

WD-8600 Agglomerated Flux For S.A. Welding
 
Standards:GB/T5293-1999   F4A2-H08MnA    AWS A5.17  F7A2-EM12K GB/T12470-2003  F55A4-H10Mn2   AWS A5.17  F7A4-EH14
 
Introduction
 
WD-8600 is an agglomerated aluminum-basic type flux with a basicity index of BIIW 1.1~1.3. The flux is charcoal grey spherical granular, grain size is from 10 to 60 mesh. When direct current weld the wire, it meets the positive electrode.WD-8600 can be welded with AC or DC at up to 1000A.Electric arc stability, forming artistically, it has an excellent slag detachability. The weld metal is pure. It has high impact toughness. The flux has low moisture pick-up granular stability. As the bulk density is low, its consumption rate is few. If it coordinates the suitable welding wire, t can be welded a variety of low-alloy steel wire structure. When it welds the boiler cooling wall, its welding speed may reach above 70mh/h,especially suitable high speed welding thin steel plate, narrow groove of thick plate and narrow-gap structure.
 
Applications
 
Welding of the boiler firm type water cool wall, high-speed flat and horizontal fillet.
 
Main Constituents (%)
 
 
Typical mechanical property of deposited metal
 
 
Notice:
1. Flux should be redried at 300~350°C for 2 hours.

 

2. All dust, oil and rust should be removed.
未找到相應參數組,請于后臺屬性模板中添加
暫未實現,敬請期待
暫未實現,敬請期待
久久综合九色综合色鬼狠狠色,国产无遮挡又黄又爽不要VIP,天天拍夜夜添久久精品,久久伊人精品青青草原,亚洲中文字幕无码中文字